Attenuated Total Reflectance (ATR)$99 Base price Go to quote list
Gas Chromatography Mass Spectroscopy
Gas Chromatography-Mass Spectroscopy combines two instrumental systems: a gas chromatograph component where the sample is volatized, followed by a mass spectrometer, which filters the incoming gaseous particles by their mass. This system outputs a quantitative representation of the chemicals present in a sample.
- Highest sensitivity for identification of trace organic impurities / contaminants
- Requires minimal sample volume
- Optimized for organic compound analysis
- Cost-effective chemical analysis
- Requires time-intensive data analysis / interpretation
- Destructive analysis
- Cannot directly analyze non-volatile, polar, or combustible samples
Sample GCMS output mass spectrum with peaks of interest identified.
- Different method setups can accommodate solid, liquid, or gas phase
In the GC component, the sample is vaporized and accelerated with a carrier gas (typically He or Ar) into a chromatographic column, where the sample particles begin to separate based on their variable interactions with the column walls. They are carried onward to pass through an ionizing domain, which imbues the incoming particles with charge.
Finally, the sample ions continue to travel through an electrostatic field, which filters them according to their mass / charge (m/z) ratio. They arrive at a detector which reads out the number of incident particles associated with each mass increment, to produce a spectrum of peaks at the characteristic m/z ratios of all chemical constituents of the sample.
GC-MS is distinct from ICP-MS in that it captures more molecular structure information for organic samples, and can be used to separate and quantify compounds in chemical mixtures.
No resources available at this time.
ATR-FTIR is a sampling mode which enhances FTIR signal obtained from sample surfaces, increasing sensitivity.
Fourier-transformed infrared spectroscopy (FTIR) is a nondestructive, optical technique used to characterize optical properties of a material, and...
NMR is a chemical analytical technique used to assay the composition and chemical structure of solutions, solids, mixtures,...