Attenuated Total Reflectance (ATR)$99 Base price View My Quote Request
Thermogravimetric Analysis (TGA)
Thermogravimetric analysis (TGA) is used to characterize sample volatility, as well as thermal stability and response.
- Exquisitely precise weight sensitivity – can detect sample mass changes < 0.1 ug
- Only a few milligrams of material is needed due to high instrument sensitivity
- Minimal sample prep
- Not available for measurements with temperatures below ~ 25 °C
TGA and derivative TGA curves of sodium tungstate sample analyzed at 10 °C/min from ambient temperature to 800 °C.
TGA Curves used in failure analysis of polyamide nylon (PA) enclosures on terminal block plug, which thermally degraded and caused critical instrument failure. Plot shows two different volatilization temperatures (peaks): suspected to be the casing itself and unknown filler.
TA Instruments TGA 5500
- Mass Sensitivity: 0.1 ug
- Temperature Range: ambient to 1200 °C
- Calorimetric Accuracy: ± 2% (based on metal standards)
- Controlled Heating Rate (up to 1000 °C): 0.1 to 500 °C / min
- Nitrogen Atmosphere
- View Instrument Spec Sheet
- Solids, powders, and semisolids accepted
- Minimum Sample Mass: ~ 0.5 g
- Sample material must have no chemical incompatibility with pan material; pan options:
- Platinum (Standard and High Temperature options available)
- Alternative pan types can be procured if needed
- Powders preferred; non-powders must be able to be trimmed to fit TGA pan
- Safety datasheets of sample materials are required
When a sample reaches high enough temperatures, it undergoes chemical and physical transitions that affect its sediment mass.
A TGA system measures the minute changes in sample weight in a controlled thermal environment – usually, as heat is applied to the system. Alternatively, constant temperature experiments can be conducted to evaluate a material’s thermal stability over a set time period.
TGA instruments plot weight as a function of temperature and/or time, and analyzing these plots reveals several thermal properties of the material, including (but not limited to): thermal stability, heat resistance, volatility, and vaporization temperatures.
DSC is a thermal analysis technique used to characterize a variety of temperature-dependent physical and chemical changes in...
Dynamic mechanical analysis (DMA) is used to study changes in the mechanical properties of a material under periodic...
Thermomechanical analysis (TMA) probes the response of the sample’s thermal, dynamic, and static-mechanical properties as temperature is changed...
Rheometry measures the flow and deformation of materials in response to applied stress and strain to evaluate their...