White Light Interferometry (WLI)

White Light Interferometry
WLI_Sample Output-3D Circuit Board Feature.

White light interferometry (WLI) is a nondestructive, non-contact, optical surface topography measurement which uses coherence scanning interferometry to generate 2D and 3D models of surface height.

  • Steep cut-offs and sharp topography angles impair WLI measurement accuracy around these features
  • Interpretation of fringe changes can be difficult in certain types of samples
Base Prices
Technique Variants
Pricing Starts At
White Light Interferometry (WLI)
$225 / Hour
Example Outputs

3D WLI measurement: the figure of Lincoln sitting in his monument on the surface of a US 1 cent coin (barely visible with the naked eye), visualized clearly with WLI.

3D WLI measurement of a circuit board feature.

Instruments Used for WLI
Zygo ZeGage Plus

Zygo ZeGage Plus

  • Magnification Range: 10x to 50x
  • Maximum Vertical Scan Range: 20 mm
  • Surface Topography Reproducibility: ≤ 0.15 nm
  • Optical Lateral Resolution: 0.52 μm
  • Step Height Accuracy: ≤ 3%

View Instrument Spec Sheet

Sample Requirements
  • Solid phase
  • Material: opaque, transparent, coated, uncoated, specular, or rough
  • Maximum lateral dimension: 147 mm
  • Maximum vertical height: 100 mm
    1. Larger sample width and depth possible with partial coverage / scan area
  • Sample reflectivity: 0.05 – 100 %
How WLI Works

WLI instruments use a white light source to illuminate the surface of the sample.

A beam-splitter divides the white light beam into two optical paths: one that reflects or scatters from the sample and one that reflects from a flat, known reference mirror. These two signal beams are then mixed together and the resulting image is projected onto a CCD image sensor.

The two beams, when mixed, form an interference pattern whose intensity can be related to the sample surface height: any difference in optical path length between the reference and sample beams changes the measured interference intensity at each scanned point, providing an indirect measure of the height variance in the sample.

The interference fringes are analyzed at each point to build up a 3D map of the sample surface.

Comparison link sent successfully
Please use valid email address
You need to have at least 2 techniques to compare
You can select maximum 5 techniques
Covalent uses cookies to improve your browsing experience and to help you access the most relevant information and services efficiently. To learn more, view our
I Accept Cookies
techniques selected
Select at least 2 techniques to compare Compare techniques